DC Series Load Banks
Portable or Stationary Designs
The DC Series Load Banks :
Setting the standard for testing Mission Critical DC Systems.
Portable or Stationary Designs
LBD offers the flexibility of compact, portable load banks or for larger applications, permanently installed, outdoor rated units
High Capacity Resistive Loads
Ideal for testing and maintenance of large DC power systems, battery systems, UPS systems, rectifiers and power supplies
The Load Bank Experts
The team at LBD have been manufacturing high capacity resistive loads for almost 20 years. LBD leads the market with innovative designs in AC, Resistive Reactive, Medium Voltage and DC applications

Resolution (typical)
1A to 25A
System Voltages (typical)
12VDC to 1100VDC
Enclosure Type
Portable or Stationary
Main Features
- LBD’s DC Load Banks are specifically designed for your testing requirements.
- Can be configured for Portable or Stationary applications, indoors or out.
- Ideal for battery capacity testing & maintenance, acceptance testing, discharge testing and other testing for DC power systems.
- Common applications include telecommunication, data centers, utility and military.
- The DC Series is the perfect solution for regularly scheduled maintenance testing and commissioning of mission-critical DC power systems.
Construction | Built to Last
The DC Series enclosures are constructed of galvanized steel with the highest quality durable powder-coat paint finish, and external stainless steel fasteners. The load bank can be designed for permanent installation or can be of portable type (consult factory for available sizes). For permanent installations, the enclosure is of outdoor construction, to be installed and operated on a floor, roof-top, or concrete pad. Portable load banks provide ease of positioning with moving handles and heavy-duty casters. Tie-down provisions allow for secure transportation to and from job sites. Larger load banks have forklift channels within the base for ease of lifting and handling during installation.


Operator Controls
- Emergency Stop (E-Stop)
- Illuminated Main Power On/Off switch
- Master Load On/Off switch
- Fault condition smart indicators
- Individual Load Step Switches
Operator Protection | When Safety Matters
The DC Series Load Bank comes equipped with an Emergency-Stop push button allowing the operator to take the unit off-line should a critical hard-stop condition occur. Blower On, Motor Overload, Air-Flow Failure, and Over-temperature circuits disable all load steps during a fault condition with operator visual indicators, while the Load Dump circuit provides the operator visual indication if all load steps have been removed.

DC Load Bank Specifications
Resolution | Airflow | Rating |
1A to 25A typical | Side intake | Continuous duty |
Vertical discharge | No cool down required | |
Cooling | Power Connection | Enclosures |
Air Cooled by High-Performance Blower Motor | Cam-Lok or Direct to plated bus bar | Heavy Duty |
Wired to external AC power source | Powder Coat Paint | |
Power Wiring | Contactors | Options |
150C insulated, EPDM | Full capacity | DC Voltmeter |
Heavy duty | Non standard voltages |
Standard DC Voltages
The DC Series is typically designed in the 12 VDC - 1100 VDC range. Standards include 12, 26, 48, 52, 120, 160, 270, 400, 600 and 1100 VDC.
Standard Ampacities
150, 250, 500 and 1000 A.
Please consult factory with your exact specifications.